-- Menu --
| |
| |
| |
-- Recherche --
| |
| |
| |
-- Stats --
| |
pages vues depuis le 22/10/2007 : 1881788
· Membres : 34171
· News : 1
· Downloads : 0
· Liens : 0
| |
| |
-- Partenaires --
| |
| |
| | |
Auteur | Message |
gapa055
Junior Member
Messages : 10 Inscrit(e) le: 26/02/2019
|
Posté le 26/02/2019 07:40 | | High Quality Snap Hook |
Metal Beefy Bolt Snaps Product Details: SKU#:FW-00083 Material:Steel, iron, zinc alloy Processie Casting Packagelastic bag with PE Foam, or as per customer’s requirements. OEM/ODM:Both accepted Certificate:ISO factory, ROHS, CE Certificate Lead Time:30 days Product:For bag, dog leash We provide different style, different size and color swivel metal beefy snap hooks, high quality, durable, good look. Squared beef snap hook size: 3 1/8” x 1 3/8” x 1/2” (78mm x 35mm x 13.5mm), for 1.5” webbing. Weight: 0.132Lbs (60g) Aesthetics for hardware products themselves 1.Foreign material/bright speck: D<0.5, S<0.3,acceptable number is 3pcs at front face, 5pcs for side face,7pcs for back and bottom face;0.5 <D<0.6,0.3<S<0.5 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.6 <D<1.0,0.5<S<0.8, 0pc at front face, 1pc for side face,2pcs for back and bottom face 2.Hard scratch mark, handing mark: D<0.4, acceptable number is 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.4 <D<1.0, 0pc at front face, 1pc for side face,2pcs for back and bottom face; 0<L<2.0,w<0.3, 0pc at front face, 0pc for side face,1pc for back and bottom face 3.Soft scratch mark: L<4,w<0.3,acceptable number is 3pcs at front face, 5pcs for side face,7pcs for back and bottom face; 4<L<8.0.2<w<0.3, 2pcs at front face, 3pcs for side face,5pcs for back and bottom face; 8<L<10.W<0.3, 1pc at front face, 2pcs for side face,2pcs for back and bottom face 4.Burrs: L<0.2mm,no obvious hand feel and no effecting assembly. 5.Oversized R angle: refer to project drawing and limited sample R 6.Crop irregularity: refer to limited sample 7.Dimensional deviation: refer to project drawing 8.Deformation: refer to confirmed component samples 9.Color deviation: ΔE<1 or refer to limited sample 10.Insufficient chamfer: no allowance. Aesthetics for spraying hardware products 1.Foreign material/bright speck: D<0.5,S<0.3,acceptable number is 3pcs at front face, 5pcs for side face,7pcs for back and bottom face;0.5 <D<0.6,0.3<S<0.5 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.6 <D<1.0,0.5<S<0.8, 0pc at front face, 1pc for side face,2pcs for back and bottom face 2.Hard scratch mark, handing mark: D<0.4, acceptable number is 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.4 <D<1.0, 0pc at front face, 1pc for side face,2pcs for back and bottom face; 0<L<2.0,w<0.3, 0pc at front face, 0pc for side face,1pc for back and bottom face 3.Soft scratch mark: 4<L<8.0.2<w<0.3, 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 8<L<10.W<0.3, 0pc at front face, 1pc for side face,2pcs for back and bottom face 4.pile paint: no allowance 5.Shrinkage: refer to limited sample 6.flying paint: L<0.3mm or refer to limited sample 7.Stripping: no allowance 8.Color deviation: ΔE<1 or refer to limited sample 9.Glossiness: refer to limited sample 10.Handprint, exposed base, shadow: no allowance Aesthetics for electro plated products No scratch mark, bubbles, drop, hard spot, broken filament, fisheye, blur, rust mark ,deckle edge ,deformation, breakage, poor treating, poor molding, water wave mark on electroplated surface Size Measure important dimensions of products per approved samples, purchase order etc, the result can’t be beyond the tolerance Trial Assembly Assemble each accessory, complying with assembly requirements of finished products, no poor assembly. Safety Requirement No sharp point, sharp edge, scraping etc. Function check The product function is identical to customer’s specified function. Adhesion test After test, removal area not more than 10%, for hardware plating parts, the peeling of plating layer should <5% after adhesion test; Salt Spray Test For hardware plating parts, have to do the salt spray test of 24H. and surface don`t allow to have rust after test. Package: 1.Don’t accept single corrugated box; 2.No metal needle, sharp point or edge 3.Clear and correct shipping mark, organized sealed box. 4.After the standard dropping testing, no damage of products and box, no dislocation inside.High Quality Snap Hook website:http://www.fwhardware.com/die-casting/metal-snap-hooks/
|
|
Revenir en haut | |
| |
| |
-- Login --
| |
Membres
· Admins : 3 · Membres : 34168 [Liste]
· Dernier : icarime
Qui est en ligne ?
· Visiteur : 1 · Membre : 0 · Admin : 0
| |
| |
-- Sondage --
| |
| |
| | |